Suzuki Jimny (2018-Current) Load Bar Kit – by FrontRunner
£0.00 + VAT
SKU / Part Number:
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full FrontRunner Roof Rack. This low profile, smaller footprint solution includes 4 130mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions – all the components necessary to mount the FrontRunner Load Bars to a vehicle with gutters. A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full FrontRunner Roof Rack. This low profile, smaller footprint solution includes 4 130mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions – all the components necessary to mount the FrontRunner Load Bars to a vehicle with gutters. You may not have the need for a full roof rack and find that you can get by using a set of FrontRunner load bars. Can be used to mount a FrontRunner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred. The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs. Uses the same strong, corrosion free aluminum slats found in FrontRunner Slimline II Roof Rack Accessories. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete FrontRunner Roof Rack. Made from stainless steel and a durable, weather resistant black powder-coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.Note: Load carry limit and accessory compatibility is reduced with load bars, Please also check the maximum roof load capacity of your vehicle.
Specification: KRSJ007 – Suzuki Jimny (2018-Curr) Load Bar Kit Consisting of:2 x LASS102 – No 2 Leg 130mm (Pair) – by FrontRunner 1 x LBSK015 – Roof Load Bar Pair 1345mm(W) – by FrontRunner 1 x WDLB001 – Load Bar Wind Deflector / 10mm – by FrontRunner Material used:Black epoxy powder-coated T6 aluminium High strength steelApproximate Installed Weight 7kg (16lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8”) to the height of the Foot or Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8”) to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8”) to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width205mm (8)Length600mm (24)Height 75mm (3)Shipping Weight:Weight8.3kg (18.3lbs)
Fitting Instructions: https://content.FrontRunneroutfitters.com/collateral/doc/F_LASSUNI.pdf, https://content.FrontRunneroutfitters.com/collateral/doc/F_WDLB001.pdf, , ,
WARRANTY:
Weight | 8.3 kg |
---|---|
Dimensions | 205 × 600 × 75 cm |
Related products
-
140mm TRoof Rack Accessories – by FrontRunner
£0.00 + VATAdd to Wish ListAdd to Wish List -
Track / 1400mm(L) – by FrontRunner
£0.00 + VATAdd to Wish ListAdd to Wish List -
Add to Wish ListAdd to Wish List
-
Narrow Slat / 1255mm (Pair) – by FrontRunner
£0.00 + VATAdd to Wish ListAdd to Wish List